The HiLyte Leader GRP Tower is compliant to EN1004:2004 standard and has non–conductive/sparking,
non–corroding and non–oxidising properties. The HiLyte Leader GRP Tower can be used in ZONE 1 AREAS; these
are areas in which an explosive atmosphere is likely to occur in normal operation. In these areas
only Zone 1 rated materials are acceptable. However, there are other areas within industrial and
manufacturing processes that represent a greater than usual risk of fire or hazard from electrical or
chemical contact, or in ’clean’ environments associated with food and hi–tec manufacture.
When safe access is required in these areas, in the course of production or maintenance tasks, the use
of the HiLyte Leader GRP Tower is highly recommended.
Lightweight, manoeuvrable and competitively priced the HiLyte Leader GRP Tower features serrated rungs for extra grip when
safely ascending and descending the integral ladder system. Unlike any other fibreglass mobile scaffold towers on
the market the HiLyte Leader GRP Tower is fabricated and constructed with unique patented anti–fall joints. The
anti–fall joint design eliminates the problem of using unsecured adhesive binding joints, thereby preventing the disconnection
of joints and ensuring maximum safety. Available in lengths of 1.8m and 2.5m and widths of 0.85m (Single) and 1.45m (Double)
with up to a 12.2m platform height it has a maximum platform safe working load of 200kg for the single width platform and 400kg
for the double width platform.
- Patented fail safe joint system
- Non–corroding and non–oxidising
- Tested to EN1004:2004
- Integral ladder system
- Available in lengths of 1.8m and 2.5m
- Available in widths of 0.85m and 1.45m
- Impact resistant brace claws
- Maximum platform safe working load of 200kg or 400kg double width
- Platform deck edge protection is made up of GRP profile
- Ideal for use in Zone 1 areas
- Lightweight and manoeuvrable
Please get in touch for details of the 2.5m long version of this tower.